Anyone can log
a temperature.

Reading a cure takes years of experience. RotoLogic has it built in — it grades every part and tells the operator when to switch the oven off.

TempLogger Live · cure bands
Images are for reference only
2003Trusted since
65+Countries
200+Companies
400+Sender units
The category

See inside the mould.
Run the whole factory.

Everything else does one or the other. RotoLogic does both.

In-mould instruments

Data loggers
✓Sees inside the mould
✕Grades the cure for you
✕Runs the whole factory
✕Signals the machine

RotoLogic

Measures the cure. Runs the floor.
✓Sees inside the mould
✓Grades every cycle
✓Runs the whole factory
✓Signals the machine

Factory platforms

Cloud machine monitors
✕Sees inside the mould
✕Grades the cure for you
✓Runs the whole factory
✕Signals the machine

Connecting RotoLogic to your machine's controls is a separate job, quoted for your site.
Your machine's own controls and timer keep working exactly as they do now.

The difference

A graph shows the temperature.
RotoLogic tells you if it's cured.

01

The answer, not the graph

Every product carries its own cure zones. RotoLogic grades each cycle against them — good cure, over-cure, degraded — and names the moment to switch the oven off.

Cure grade · live
Images are for reference only
02

One system for the whole factory

Every machine on the floor, a Manager Portal you open from the office, and support and updates delivered remotely. The cloud platforms that do this can't see into the mould.

Modular dashboard
Images are for reference only
Plug it in and it runs

No installation engineer, no internet connection. It keeps logging when the network drops.

Start small, add later

Pay for the parts you need now. Add more when the floor grows.

The settings stay

Cure settings and product records stay in the system when the person who made them leaves.

Your name on it

Your company's name and logo on the screen your operators use.

The rest of it

One system, one licence.

Your whole floor from the office or your phone — every machine on every line, and the last run on each. Separate from the factory computer, with your own company login.

Manager Portal · your factory floor
Images are for reference only

Every machine on one screen — what ran on each and when it finished. The operator sees the whole floor from any machine, not just the one in front of them.

Floor console · the whole floor
Images are for reference only

The operator flags a problem at the machine; it arrives in the manager's inbox with the run, the machine and the temperatures attached — and the reply goes back to the floor.

Manager Portal · from your floor
Images are for reference only

Cycle history, deviation rate and machine efficiency by oven, arm and product — the numbers your directors ask for.

Reports
Images are for reference only

Put up to six runs on one chart, lined up from the moment the temperature starts to climb, with each product's cure zones drawn behind them.

Data Compare
Images are for reference only

Your materials, your machines, your products — set up once in that order. Each product carries its material, its cure target, the machines it runs on and what the box has learned on each of them.

Library
Images are for reference only
Two plans

Measure it, or measure it and act on it.

Essential

For a floor that wants the cure measured, graded and on record.

  • TempLogger Live — every probe, every run, as it happens
  • Library — materials, machines and products
  • Reports on the box
  • Maintenance
  • Operator messages, machine to manager
  • Import from TempLogger V6
  • Support & warranty log
  • Manager Portal: overview, messages and reports

Professional

Everything in Essential, plus the parts that act on what it measures.

  • Data Compare — runs side by side, with the cure verdict
  • Machine signalling — the recipe trips the relays
  • The Manager Portal in full: floor, quality, weekly director report, compare, needs-review, repeat problems, fault catalogue, schedule and library
Every plan carries the cloud link, updates and the licence · Material Hub is an add-on
One-timeHardware
AnnualPlatform licence
ModularLicence what you use
Tell us what you run and we'll price it — ask for a quote.

Start with one machine · add boxes as the floor grows

Founding Partner programme

Run it first.
Shape what it becomes.

We're opening RotoLogic to a small number of moulders. Not customers — partners.

You get

  • Six months of RotoLogic Professional, free
  • The system on your floor before anyone else
  • First access to everything new
  • Real influence over what gets built

We ask

  • Your cure data — it makes the system smarter (opt out any time)
  • A few minutes when something looks wrong
  • Honest feedback from a real floor
  • A case study, if the results are worth one
Apply to join

You buy the TempLogger hardware at the normal price. RotoLogic Professional is free for your first six months.
Nothing renews automatically. When the six months end you choose a plan within 30 days, or it simply stops. Your cure data helps the system learn — it is never shared with another customer, and you can opt out at any time.

Limited places · built on TempLogger hardware, proven since 2003